Home »
Our Products » Commercial Burners
Commercial Burners
Torch Type Gas Burners
Description
These high pressure Burners are recommended for
heating curved surface vessels as they produce powerful torch type flame.
 |
| Model no- |
Pressure required |
Capacity |
Heat output |
Burner inlet size |
| NT-1 |
0.3 kg/cm2 |
1 kg./hrs |
11000 kcal/hrs |
3/8 |
| NT-2 |
0.3 kg/cm2 |
1.59 kg./hrs |
19000kcal/hrs |
3/8 |
| NT-3 |
0.3kg./cm2 |
2.27kg/hrs |
25000 kcal/hrs |
3/8 |
| NT-4 |
0.3kg/cm2 |
3.54 kg./hrs |
40000 kcal/hrs. |
3/8 |
|
|
Ring Type Gas Burner
Description
These high pressure burner are recommended for
heating flad surface vessels. They produce sunflower shaped flame.
|
| Model no- |
NM-1 |
NM-2 |
NM-3 |
| Pressure required |
0.3 kg/cm2 |
0.3 kg/cm2 |
0.3 kg/cm2 |
| Gas Consumption |
1 kg/hrs |
1.59 kg/hrs |
2.27 kg/hrs |
| Heat output |
11500-kcal/hrs |
18500 kcal/hrs |
25000 kcal/hrs |
| Burner Connection |
3/8" BSP |
3/8" BSP |
3/8" BSP |
|
|
Ribbon Gas Burners ( V-Type)
Description
- All Burner inlet connection is 3/8" BSP.
- Maximum gas pressure requierd 0.3 kgf/cm2.
- Longer burners upto 2100mm can be supplied on order.
- These burner are ideally used along with hot plate for making
chappaties,dosa.omelette etc.,as they produce two linear flames
(V-shaped) with uniform & wider heat distribution.Also useful for
hot cases,drying oven,bain marie,trough & tin bath heating.
|
| Model no- |
NV-1 |
NV-2 |
NV-3 |
| Ribbon length |
300mm |
600mm |
900mm |
| Gas Consumtion |
1,.59kg/hr |
1.59kg/hr |
1.59kg/hr |
| Rated heat output |
18800 kcal/hr |
18800 kcal/hr |
18800 kcal/hr |
|
|
